Keep Your Car Scratch-Free and Shiny!

Our cleaner keeps your car safe and shiny! It uses special ingredients to lift dirt gently without scratching. Just use a clean, soft towel and wipe gently. The cleaner has super tiny, smooth particles that protect the paint. Follow the directions, keep the car cool, and use soft towels for the best results.

Separation and Settling is Normal

In the image, the bottle on the left shows the product after it has been shaken, resulting in a consistent color and texture. The bottle on the right shows the product that has been sitting on the shelf for some time, leading to separation and settling of ingredients. It’s important to shake the bottle well before use to ensure the product is properly mixed for optimal performance.

Make sure the lid is securely closed. Gently shake until fully mixed.

 

Directions:

Stay Cool

Work in the shade and keep the car cool. Make sure the car is cool to the touch.

  • Remove any jewelry, watches, and be mindful of your clothing’s zippers and other hard objects to prevent scratches on the car’s paint.

  • Put on nitrile gloves.

  • Completely remove tags from your microfiber towels.

  • Inspect the microfiber towels for any defects that may cause scratches.

  • Inspect the car for any visible sand, leaves, branches, bird droppings, and other debris. Remove them carefully before starting the cleaning process.

Shake the bottle well. Separation is normal. Shake well before mixing the solution with water.

  1. Use 1 capful (3 for extra shine) of concentrate.

  2. Mix with 16 oz of distilled water in a spray bottle. Or Reverse Osmosis or Tap water is acceptable if sediment is below 1.0 PPM.

  1. Spray a thin coat on a small area.

  2. Wait 10 to 15 seconds.

  3. Wipe gently without applying pressure, with a clean, soft microfiber towel in straight lines.

  1. Use another clean towel to dry.

  2. Buff gently with a clean towel for shine.

  1. Don’t use towels washed with fabric softeners, as they can leave residues and cause streaks.

  2. Overuse of the concentrate can also lead to streaks. Stick to the recommended amount.

  3. Do not leave the product on the surface for too long before wiping. This can cause streaks as well. For best results, follow the timing instructions carefully.

Spray on a towel and wipe (avoid fabrics).

If your car hasn’t been washed in over 2 weeks, spray, wait 60 seconds, clean in layers, then buff. If there are any mud or heavy contaminants, clean and remove those first before using the waterless car wash solution.

Keep away from sunlight, heat, and cold. Keep away from children and pets.

Shake the bottle before and during use.

Frequently Asked Questions

How many microfiber towels do I need?

Divide the car into 5 sections: left side, right side, front, top, and back. For each section, you need 3 microfiber towels: one for applying the cleaner, one for drying, and one for buffing. Use towels that are either new or washed without fabric softeners and designed specifically for cars, without any tags or blemishes that could scratch the paint.

This means you will need a total of 15 microfiber towels for the entire car’s exterior. Additionally, you’ll need 2 microfiber towels for the interior: one for cleaning and one for buffing out streaks. We also recommend using one more microfiber towel during the final walk-around to clean any spots that may have been missed.

Furthermore, you’ll need 4 microfiber towels for the wheels and tires: one for each wheel, including the rims and the rubber parts of the tires. Clean the rims first, then the tires.

In total, we recommend having 22 to 42 microfiber towels ready for each car wash session. Buy a 50 pack from Amazon or your favorite retailer. Make sure it is designed for cars.

Yes, it is safe for new or like-new paint. Always follow the directions to ensure the best results.

We recommend using distilled water to avoid impurities and water spots. However, reverse osmosis or tap water with sediment below 1.0 ppm is acceptable. This is a very low ppm count that most reverse osmosis systems can’t produce. Most tap water in the US has ppm count of over 1.0 PPM. That’s why we recommend distilled water only.

If your car has mud or heavy contaminants, clean and remove those first before using the waterless car wash solution.

For safety reasons, we recommend that adults handle the cleaning process.

No, our cleaner is safe for your car. It uses special ingredients and tiny, smooth particles that help lift dirt gently without scratching. Follow the directions and use clean, soft towels. Use multiple microfiber towels for each section of the car. Don’t use one microfiber towel for the entire car or large sections. You don’t need to apply any pressure to clean your car.

Yes, it is safe to use on vinyl wraps. Follow the same application directions for best results.

Yes, spray the solution on a clean microfiber towel and wipe the interior surfaces, avoiding fabrics.

Yes, it is safe to use on mirrors and windshields. It will leave them clean and streak-free if you follow the directions. Buff with additional clean microfiber towel to remove any sticks. Make sure the microfiber towel are not washed with any type of fabric softeners.

Wearing nitrile gloves protects your hands from the cleaning solution and prevents any possible irritation. Also, to prevent scratches.

Wear nitrile gloves and avoid clothing with zippers or hard objects that could scratch the paint. Remove any jewelry, belts, or watches.

Yes, it is safe to use on luxury cars and supercars. Our product is designed to be gentle yet effective, ensuring a high-quality finish without scratches if you follow the directions.

Microfiber towels are recommended because they are soft, highly absorbent, and gentle on your car’s paint. They effectively lift and trap dirt without scratching the surface (unless you put pressure), ensuring a streak-free finish.

Yes, microfiber towels for cars are specifically designed with a higher GSM (grams per square meter) for extra softness and absorbency. Regular microfiber towels might not have the same level of gentleness needed for delicate car surfaces.

Yes, our waterless car wash solution can help remove water spots. Spray the solution on the affected area, wait 10 seconds, and wipe with a clean, soft microfiber towel. For best results, ensure you are using a towel that is new or washed without fabric softeners and designed specifically for cars. If water spots are stubborn, you may need to repeat the process or use a dedicated water spot remover.

No, our waterless car wash solution is designed to clean and shine your car, but it will not remove scratches. For scratch removal, you’ll need a specific scratch remover product or polish. Our solution helps prevent new scratches by lifting dirt gently and using soft, clean microfiber towels during the cleaning process.

Ceramics, polymers, and carnauba wax are generally safe for use on car surfaces and can provide a high-quality finish. However, in a Bodyshop environment, these substances might interfere with paint adhesion or other processes.